These Tailgate / V-box spreader mount pre-wet spray systems are excellent for on-board pre-wetting of granular products with deicing liquids such as calcium and magnesium chloride, salt brine and other deicing liquids.

Tank Features
• 90 Gallon Single or 135 Gallon Twin Tanks for V-Box System.
• 135 Gallon Single Tank for Tailgate System.
• Fully Interchangeable from Left to Right Side of Spreader.
• Rated for 16 Lb./Gal. Product.
• Deep Baffles, Vented Lids, and Gallonage Markers.
• Heavy Duty Polypropylene Bulkhead Fittings each end.
• Large Outside Corner "Cut" to fit New Style Dump Beds with Large Radius Corners.
• Carbon or 304 Stainless Steel Mounting Frames & Straps Complete.

Electric Pump & Control System Features
• 12-Volt Electric Diaphragm Pump (3.0 GPM) with Viton/Santoprene Internals.
• Polyethylene Sealed Pump Enclosure with Stainless Hinges & Clasp.
• Fully Pre-Plumbed & Pre-Wired including Check Valve, Strainer & Pressure Switch
• Two "Variable-Orifice" Flexible Neoprene Nozzles with Mounting Hardware.
• In-Cab Control Console including On/Off Switch, Power-On Indicator Light, "Low Pressure" Indicator Light & Variable Pump Flow Control Dial.
• Wire Harness with Sealed "Weather-Pack" Connectors.

Hydraulic Pump & Control System Features
• Hydraulic-Drive Cast Bronze Gear Pump with Viton/Teflon Lip Seal and Pressure Relief Valve.
• Stainless Steel Sealed Pump Enclosure.
• Fully Pre-Plumbed & Pre-Wired including Check Valve, Strainer & Pressure Switch
• Four Brass Nozzles with Cores, Discs & Mounting Hardware.
• Electrically Adjustable Hydraulic Control Valve ("Pressure Compensated") for In-Cab Rate Control.
• In-Cab Control Console including On/Off Switch, Power-On Indicator Light, "Low-Pressure" Indicator Light & Variable Pump Flow Control Dial.