Designed to switch control circuits such as motor starter coils, solenoids, relays or contactors. Ideal for holding tanks in RO systems. Floats contain a magnet which actuates a reed switch within the float stem when activated. 2A551, S1000S & 2A554 controls are pre-wired with 24", 22-gauge wire leads.

Model 2A551: Float is 304/316 Stainless steel construction for high temperature, high pressure or corrosive applications. 3.375" high x 2" wide. Maximum temperature is 300 Deg. F. Maximum pressure is 200 psi. Rated to 100 watts. **120 VAC or 50 VDC maximum.

Model S1000S: Same as 2A551 above but is 2" high x 1" wide. Rated to 50 watts.

Model 2A554: All polypropylene construction for general purpose applications. 2" high x 1" wide. Maximum temperature is 220���° F. Maximum pressure is 100 psi. Rated to 50 watts.**

Model 2XC13: Float and stem are polypropylene construction. Can be mounted inside or outside tank. Designed for horizontal mounting. Maximum temperature is 212 Deg. F. Maximum pressure is 100 psi. Rated to 50 watts.** 300 VAC or 350 BDC maximum. 1/2" MPT.

Model 2P055 & 2P055-20: Remote mount, wide-angle float switches encased in polypropylene with a firmly bonded electrical cable. Water-tight and impact resistant. Rated to 15 amps @ 115 or 230 volt. Standard with 10' bare cord (plug is not included) on 2P055 and 20' cord on 2P055-20. Single-Pull, Double-Throw switch. Can be used for either "on-rise" or "onfall" applications.

Model RFSN-9 & RFSN-10: Remote mount, direct-acting, in-line float switches. Standard with 15' cord and plug on RFSN-9 and 20' on RFSN-10. Sealed and waterproof. Works "On-Rise" only. Rated to 13 Amps @ 115 or 230 volt. Maximum 140 Deg. F. Non-corrosive plastic construction. Diameter of float is 3". (Little Giant Brand).

** Relay recommended with these switches.