Injection Check Valves allow chemicals to be injected into the turbulent flow near the center of the line, providing more uniform dispersion. The disk type check and seat are located at the tip of the check valve to allow constant flushing.

Mounting
Mounts directly to a coupling in the sidewall of lines 6 inches and larger. For smaller lines the check valve may be mounted to a coupling attached to a nipple (of the length required), to hold the tip of the check valve near the center of the line.

FEATURES
• Provides Back Pressure to Insure Metering Accuracy.
• Prevents Back Flow.
• Prevents Bleed Through When Water Pressure is Low or Line is Drained.
• Prevents Siphoning When Metering Pumps are Off and Line is Flowing.

Specifications: 3/4" NPT Line Connection • Check Material is Viton® • Spring Material is 316SS • Maximum Pressure is 150 PSI.

The bleeder valve from Agri-Inject is versatile and simple - and is the perfect complement to the Mister Mist'rŪ injection check valve. Put the two together to create an unbeatable assembly for controlling and adjusting your chemigation system - or use the bleeder valve alone for small-scale irrigation in nurseries or greenhouses.