650 Series Centrifugal Pump / Hydraulic Motor Units Oasis Wet Seal Technology   The Only Pumps Engineered with Today's Demanding Spray Requirements in Mind! FMC650HYD Features: Suction is 1-1/2" NPT • Discharge is 1-1/4" NPT • Maximum flow is 140 GPM at up to 120 PSI • Modified Impeller design is higher pressure at lower RPM • Maximum Pressure 160 PSI at 4700 RPM • High efficiency pressure plated gear motor • Durable E-Coating inside and out for excellent corrosion resistance • Stainless Steel shaft with integrated splined motor coupler • Oversized bearings for extended pump life • Standard with Single Mechanical Seal (Severe duty and "wet" run dry seals available.) FMC650FHYD Features: Suction 220 flange & 1-1/2" NPT • Discharge 200 flange & 1-1/4" NPT • Maximum flow is 170 GPM at up to 120 PSI • Modified Impeller design is higher pressure at lower RPM • Maximum Pressure 160 PSI at 4700 RPM • High efficiency pressure plated gear motor • Durable E-Coating inside and out for excellent corrosion resistance • Stainless Steel shaft with integrated splined motor coupler • Oversized bearings for extended pump life • Single Mechanical Seal 2-Year Warranty on Pump & Hydraulic Motor

 

VIEW CATALOG PAGE E0805

 

Part No.	Description	Wt.	Mfg.	Price	Qty.	Status	Pkg. Discount
ACFMC650HYD	Centrifugal Pump/Hydraulic Motor Unit, Cast Iron, 1-1/2" x 1-1/4" FPT, 14.5 GPM, Maximum Flow is 140 GPM, 160 Max PSI	38.0 lbs.	Ace Pumps	$690.00		Usually Ships Within 1 Week
ACFMC650FHYD	Centrifugal Pump/Hydraulic Motor Unit, Cast Iron, 14.5 GPM, Inlet 220 Full Port Flange & 1-1/2" NPT, Outlet 200 Standard Port Flange & 1-1/4" NPT, 140 GPM & 160 PSI	39.0 lbs.	Ace Pumps	$718.00		Usually Ships Within 1 Week

 

  The MAX in Pump Reliability:
• Oasis™ Wet Seal operates in Barrier Fluid Eliminating Run Dry & Abrasion Failures. Pressurized Barrier Fluid prevents Chemical Contact with Seal.
• Operates at Lower RPM (4300 maximum).
• High Load 305 Bearings for Long Life.
• E-Coat Protection on all castings for Excellent Corrosion Protection.
• Suitable for DeIcing Salt Solutions.
• Thrust Balanced Impeller eliminates bearing thrust load.

The MAX in Hydraulic Motor Reliability:
• 4,000 PSI Maximum Pressure.
• High Efficiency Pressure Plated Design.
• Dual Shaft Configuration with High Torque Splined Connection.
• Five Dedicated Motor Bearings.
• Integrated Anti-Cavitation Check.
• Seal Case Drain Available-Suggested for Engineered Systems.

The MAX in Performance:
• Maximum Pressure 150 PSI @ 4250 RPM.
• Maximum Flow 290 GPM @ 52 PSI.
• 200 GPM @ 135 PSI when Deadhead Pressure is 150 PSI.
• Flanged Ports for Maximum Flow - 300 Series Suction x 220 Full Port Discharge.  

Ace Pump Repair Parts > Flow Limiter Valves

Fittings

Pumps & Pump Units > Pump Accessories

Ace Pump Repair Parts Ace Pump Parts Schematics