Cart
Browse Catalogs |
 |
 Effluent Sump Pumps
Standard Temperature Pumps
Designed for pumping dirty water with solids handling capabilities up to 3/4" diameter. Completely submersible design.
Applications include: De-watering Construction sites Sewer/Septic lines Fountains/waterfalls Elevator Pits, Car Wash Pits and many more. Standard Features include: Cast iron pump housings with protective epoxy coating for corrosion and rust resistance. Vortex Nylon impeller (except 20E-CIM). Mechanical seals with (stainless steel spring, Nitrile, Buna or Viton parts, carbon and ceramic or Ni-resist faces). Oil-filled (mineral oil) motor housings for lifetime lubrication and rapid heat dissipation. Thermal overload protection. All motors are single phase, three available on some models UL listed, CSA approved. Check pump components for compatibility if chemical solutions are to be removed. See lower part of page for individual item details: |
Additional Information
Model 6E-CIM: Manual pump with flow rates to 50 gpm, (27 gpm @ 15' height). Shut-off height is 20'. Motor is 1/3 hp, 115 volt with 25' power cord. 13 amp draw at startup. Discharge port is 1-1/2" FPT. Handles solids up to 1/2". Seal is Buna. Dimensions: 9-7/8" H x 8-3/4" L x 8-1/2" W. Weight 27 lbs.Model 6E-CIASFS: Same as above but with attached float switch for "on" at 7-10" and off at 2-5" liquid levels. Dimensions: 10-1/4" H x 10-1/2" L x 8-1/2" W. Wt. 28 lbs.
Model 8E-CIM: Manual pump with flow rates to 52 gpm, (33 gpm @ 15' height). Shut-off height is 21'. Motor is 1/3 hp, 115 volt with 25' power cord. 14 amp draw at startup. Discharge port is 1-1/2" FPT. Handles solids up to 3/4". Seal is Buna. Dimensions: 8-1/4" H x 9-5/8" L x 6-7/8" W. Weight 28 lbs.
Model 8E-CIARFS: Same as above but with remote float switch for "on" at 7-10", off at 2-5" liquid level. Weight 29 lbs.
Model 10E-CIM: Manual pump with flow rates to 80 gpm, (52 gpm @ 15' height). Shut-off height is 26'. Motor is 1/2 hp, 115 volt with 25' power cord. 40 amp draw at startup. Discharge port is 1-1/2" FPT. Handles solids up to 3/4". Seal is carbon/ceramic/Nitrile. Dimensions: 10-3/8" H x 9-5/8" L x 8-1/4" W. Weight 36 lbs.
Model 10E-CIARFS: Same as above but with 15' cord and a remote float switch for "on" at 11-15", off at 5-9" liquid level. Weight 37 lbs.
Model 14EH-CIM: Manual pump with flow rates to 60 gpm @ 20' or 40 gpm @ 40' height. Shut-off height is 50'. Handles solids up to 3/4". Motor is 1/2 hp, 115 volt with 20' power cord. 22 amp draw at startup. Discharge port is 2" FPT. Handles solids to 3/4". Seal
is carbon/ceramic/Nitrile. Dimensions: 16-1/8" H x 14-1/16" L x 9-7/8" W. Weight 74 lbs. Minimum discharge head 20'.
Model 16EH-CIM: High Head, Manual pump with flow rates to 90 gpm @ 30'. Shut-off height is 81'. Motor is 1 hp, 230 volt with 20' power cord. 30 amp draw at startup. Discharge port is 2" FPT. Handles solids up to 3/4". Seal is carbon/ceramic/Nitrile. Dimensions: 16-1/8" H x 14-1/16" L x 9-7/8" W. Weight 89 lbs. Minimum discharge head 30'.
Model 20E-CIM: High Head, Manual pump with flow rates to 135 gpm @ 20' height. Shut-off height is 110' . Handles solids up to 3/4". Motor is 2 hp, 230 volt with 20' power cord. 30 amp draw at startup. Discharge port is 2" FPT. Handles solids to 3/4". Seal is carbon/ceramic/Nitrile. Dimensions: 17-1/2" H x 13" L x 8-1/2" W. Weight 92 lbs. Standard with a brass impeller.
Vitonฎ is a registered trademark of DuPont Performance Elastomers
Related Items
 Fittings |
 Hose & Tubing |
Repair Parts
Little Giant Pump Parts
Schematics
Little Giant Pump Schematics
