For pumping of dirty water applications where no solids exist. Submersible pump design with thermal overload protection. Cast Iron housings with Epoxy coating on all but 5MSP & 5ASP models which feature Zinc housings. Polypropylene base and Polycarbonate base. Available in Manual or Automatic versions.

Model 5MSP: Manual pump with flow rates to 18 gpm, (14 gpm @ 20' height). Shut-off height is 26'. Standard with Viton seal. Motor is 1/6hp, 115 volt with 18' power cord. 5 amp draw at startup. Discharge port is 1" FPT. Dimensions: 7-3/4" H x 6-1/16" L x 4-5/16" W. Weight 9 lbs.

Model 5ASP-FS: Same as above but with remote float switch for "on" at 11" and off at 3". Power cord is 10'.

Model 6CIM-R: Manual pump with flow rates to 45 gpm, (12 gpm at 15' height). Shut-off height is 18'. Motor is 3/10 hp, 115 volt with 25' power cord. 13 amp draw at startup. Discharge port is 1-1/2" FPT. Dimensions: 7-1/4" H x 9-1/4" L x 7-1/4" W. Weight 18 lbs.

Model 6CIA-RFS: Same as above but with remote float switch for "on" at 7-10" and off at 1-4". Standard with 10' power cord.

Model 6CIA: Same as above but with an attached float switch. Dimensions: 6" H x 9-1/2" L x 8-1/2" W.

Model 10-CIM: Manual pump with flow rates to 70 gpm, ( 30 gpm @ 20' height). Shut-off height is 23'. Motor is 1/2 hp, 115 volt with 10' power cord. 40 amp draw at startup. Discharge port is 1-1/2" FPT. Dimensions: 10-1/2" H x 9-1/2" L x 9" W. Weight 37 lbs.

Model 10-CIA: Same as above but with attached float switch for "on" at 8-12" and off at 1-1/2-5".