DCS 400 & DCS 410 Spray Control Systems
Provides 3-Section Liquid Spray Bar Control or Granual Spreader Control
Up to six different application rates can be programmed into the DCS 400. The application rate dial can then be set to any one of the six pre-programmed rates for rapid rate control changes. A manual switch on the console allows the operator to override the pre-programmed application rate by increasing or decreasing the rate at any time.
The DCS 400 features a "Blast" button which, when pressed, sends a higher rate blast for as long as the operator holds the button. Also, a timed blast can be added to the blast cycle once the blast button is released. This gives the operator both manual and timed blast capability.
Rates can be displayed in either gallons per lane mile or gallons per thousand square feet.
The DCS 410 is an enhanced version of the DCS400. It includes all the features of the 400 plus many others such as GPS/data logging capability, backlit switch panel, 3 display screens, tank low alarm, tank low shut-off, 10 application rates, minimum flow rate setting, adjustable off-rate alarm, zero speed valve shut-off, independent pump loading capability, temperature sensor, two speed gear ratio and removable calibration key. The DCS410 will also work with proportional pulse width modulated valves made by Raven and other valve manufacturers. Also handles high & low flow booms (2 Tiers).