H25 Hydra-Cell Pump

MAX 20 GPM, 1000 PSI, 1050 RPM (1-1/8" Shaft)

Common Applications include:
Car Washes: Conveyor - Reclaim water
Lawn Care: Herbicides and Fertilizers
Carpet Cleaning: High Temperature Solutions
Water Treatment: Reverse Osmosis and Desalination Systems
Automatic Car Washes: High Pressure Pumping Units
Food Industry: Poultry and Meat Processing

Max. Required HP: 13.9
Inlet: 1-1/2"
Outlet: 1"
Dimensions: 15-1/2" L x 9-1/2" W x 10" H

Features:

  • As seen above, this versatile pump family can be used to accomplish a wide range of applications
  • One can expect to be able to pump the full spectrum of low-to-high viscosity fluids
  • Unique seal-less design and horizontal disk check valves enable the pump to handle abrasive products and suspended particulates that might damage and even destroy other types of pumps
  • Simple and basic design keeps not only initial costs down but keeps maintenance costs down also
  • The efficiencies of this pump reduce energy costs
  • Pump can run dry without damage
  • Minimal maintenance and downtime due to the fact that there are no seals, packings, or cups that can fail


Note: This pump can be ordered at flow rates of 4 or 6 GPM @ 1750 RPM if required.
Item Description Quantity Availability

Unit Price: $2,912.00/EA

In Stock
Notes:
*Optimum Usage of Pumps is 10% under full rating.
For specific applications, special materials of construction are available. Please give pumping requirements when ordering.

Additional Information

For Difficult fluids such as: Reclaim Water • Abrasives • Hot Solutions to 250 Deg. F (300 Deg. F. with special seals) • Slurries • Wettable Powders • Fertilizers • Acidic Solutions

Solutions never come in contact with the pumping mechanism. Diaphragm design has no cups, packings or mechanical seals; this means less maintenance and down-time.
Hydra-Cell pumps are American-Made, positive displacement pumps. They are self-priming and can be run dry without damage. Hydraulically balanced diaphragms and Timken roller bearings are standard features. Shaft rotation can be in either direction for ease of mounting.

MATERIALS: Pump heads- Brass on models D10, D15, H25 & D25, Cast Iron on model D40. Buna-N Elastomers, Stainless Steel Valves, Seats and Valve Springs standard on all models. Rated to 160° F. on standard pumps, higher temperature pumps also available.

Schematics

Repair Parts