Sewage Pump, Automatic Shutoff

80 GPM @ 10', Up to 2" Solids

Stainless Steel • 115 Volt • 1PH • 1/2 HP • 2" FPT

An excellent choice when effluents, sewage and larger solid handling is required.

• Oil-lubricated double mechanical seals with Viton® elastomers
• 2" Solids handling capability
• Rated for continuous duty
• 304 stainless with high quality corrosion-resistant materials
• Permanent split capacitor motors good for 20 starts per hour
• Built-in thermal protection on single phase models
• ISO2548 Rating
• 25' UL/CSA Water resistant cords
• Manual or Automatic shut-off
• Operates fully or partially submerged.

The ideal choice for pumping Industrial, Agricultural or Commercial waste water with suspended solids up to 2" diameter. Available in 1/2 hp through 2 hp sizes in single or three phase. Standard with 25' cords. Rated to 105° F. continuous or 140° F. intermittent duty. Ports are 2" FPT.
Notes:
* You must run this pump at 10' minimum discharge head.

1-phase motors are 115 or 230 volt, 3-phase are 208/230 volt.
Maximum flow rates will decrease with higher discharge pressure or heads.

Viton® is a registered trademark of DuPont Performance Elastomers.