1/2 - 1-1/2 HP Gear Pump/Motor Unit, Stainless Steel

Available for direct motor mount to 56C frame motor or pedestal style. Polyslufide gears are compatible with a wide variety of chemicals. Charts available on request.

Specifications:
• 316 Stainless, Vitonฎ seal standard (Teflon seal optional)
• 1725 RPM Drive
• Maximum 125 Psi
• 3/8", 1/2" & 1" ports
• 4.6 to 24 GPM
• Can be base mounted.

FEATURES: Polyphenylene Sulfide gears provide high strength with excellent property retention at elevated temperatures • Operates at lower noise levels with less wear • Long-wearing, dripless mechanical seals standard • Optional double mechanical seals • Self-lubricating ball bearings • Stainless steel shaft • Flush ports • 3/8", 1/2" or 1" NPT ports • Carbon graphite bushings • Bi-Rotational • Maximum pump speed is 1725 RPM • Maximum of 125 PSI • Uses 56C motors • Ports are capable of 360ฐ rotation.
Notes:
On Sherwood and other gear pumps fill the pump with liquid through a priming tee or discharge piping. GEARS MUST BE WET BEFORE RUNNING. Do not run dry! A properly primed pump has a 10' vertical lift. Running the pump dry will result in premature seal and/or pump failure. If a flooded suction line does not exist, to maintain prime install a foot valve in the suction line.

*We can't show pricing for some of the items due to manufacturer's restrictions. Please call us at 1-888-677-5054 if you need pricing on these items. You will be invoiced for these items at current pricing plus shipping & handling.

Additional Information

Vitonฎ is a registered trademark of DuPont Performance Elastomers
Get Updates & Specials!

HOW DO YOU LIKE
OUR WEBSITE?

We'd like to hear from you!

[+] Feedback