AIC Nozzle/Cap Assembly, Polymer, 110°, .025 Orifice, Lavender, Ceramic Insert

50 Mesh Screen Recommended but not Included • Molded Nozzle, Cap & Gasket

This aspirating nozzle will do an excellent job of reducing drift on broadcast applications. Fluid flow pulls air into the nozzle through the air induction ports where it mixes with the spray fluid in a mixing chamber. The result is air filled droplets that are larger than normal, which are less subject to drift. As these drops burst on the target they explode on impact into many small droplets providing good coverage and penetration. Pressure Range is 30 - 115 PSI.

For pre emerge herbicides minimum pressure is 40 psi, for posting chemicals use 80 psi or higher.

VK Models have a ceramic insert and have a tapered edge flat spray pattern. Has EPDM gasket.

Use with CP25597 quickjet caps. (See related items.)
*AIC Models are Nozzle/Cap Assemblies

Manufacturer:

SKU: SSAIC110025VK

VIEW CATALOG PAGE E0371

$10.57 / EA

Qty:

i h

AIC Nozzle/Cap Assembly, Polymer, 110°, .025 Orifice, Lavender, Ceramic Insert

50 Mesh Screen Recommended but not Included • Molded Nozzle, Cap & Gasket

Shipping costs will be invoiced at time of shipment for all orders shipping to locations outside of the contiguous United States including Hawaii and Alaska. If you require a freight quote, please call us at 1-888-677-5054.