Automatic Cycle Weep System "Weep Mizer" (For Car Wash Freeze Protection)

For Freeze Protection

• Eliminate customer "Washing" with weep water
• Reduce total weep water usage
• Save on water and sewer bills
• Use as a System Thermostat for control of other equipment
• Acts as Weep System Thermostat

"Weep Mizer" Automatic Cycle Weep System. Designed to "Cycle" your weep water: On for an adjustable amount of time and then off for an adjustable amount of time.

Unit adjusts the "on weep" "off-weep" periods for a rise or fall in temperature. (i.e. Weep is on for 6 seconds and off for 54 seconds when the temperature falls below 35° F. Weep is on continuously if temperature falls below 15° F.) Unit can be easily recalibrated for other on-off time periods if climate dictates.

STANDARD FEATURES Include: Accurate to + or - 1/2 ° F. Operating range from -20 to +112 ° F. • Designed with battery backup to eliminate the need to re-program if there is a power failure • One unit will handle all bays for all necessary weep requirements • Continuous display of outside temperature on display board • Acts as a secondary thermostat for control of floor heat boiler, pump room heater, etc. • Manual override of automatic operation if other on-off weep periods are required • Maintains memory of "on-time", "weep time saved", high temperature and low temperature recorded for the day • Unit can be easily re-programmed with two push buttons • Requires only 120 Volt AC for operation • Used with a Normally Open Solenoid (not included) to control weep water supply. 50' Sensor probe and cord included.

Manufacturer:

SKU: DXDX1000

VIEW CATALOG PAGE E0018

$459.00 / EA

Qty:

i h

Automatic Cycle Weep System "Weep Mizer" (For Car Wash Freeze Protection)

For Freeze Protection

Shipping costs will be invoiced at time of shipment for all orders shipping to locations outside of the contiguous United States including Hawaii and Alaska. If you require a freight quote, please call us at 1-888-677-5054.