Picture of Plunger Pump: MAX 4.0 GPM, 2500 PSI, 950 RPM, 1/2" Inlet, 3/8" Outlet, 20 mm Shaft

https://siettroc.sirv.com/Spins/CC5CP2120W/CC5CP2120W.spin

Plunger Pump: MAX 4.0 GPM, 2500 PSI, 950 RPM, 1/2" Inlet, 3/8" Outlet, 20 mm Shaft

Flow: 4.0 GPM
Pressure Range: 100 to 2500 PSI
RPM: 950 RPM
Inlet: 1/2"
Outlet: 3/8"
Shaft: 20 mm
Mounting Kit: 30659 (Includes 30611 Mounting Rails, 30633 Pulley 8" Diameter, Key, 118672 shaft protector cover or 30611 (Mounting Rails Only)

Additional Features
This is a triplex plunger pump – meaning it contains three plunger rods. This pump is a positive displacement, reciprocating unit which is constructed of a special W770 manifold. It contains 304SS valve assemblies and solid ceramic plungers. It comes standard with NBR Buna-N seals and o-rings.

Manufacturer:

SKU: CC5CP2120W

VIEW CATALOG PAGE E0030

$752.00 / EA

Qty:

i h

Specifications

Products specifications

Pump Type	Plunger
Seal Material	Buna
Inlet Size	1/2"
Outlet Size	3/8"
Shaft Size	20mm
Max GPM	4
Max PSI	2500
Max Temp (Deg. F)	160

Additional Information

CAT PUMPS® TRIPLEX PLUNGER PUMPS are designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Widely used in continuous-duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and many more.

CAT PUMPS® are the "Pumps with Nine Lives". Standard Features Include: High pressure seals that are lubricated and cooled by the solution being pumped • Oil-bath crankcase • Heat treated valves and seats • Forged brass or stainless steel manifolds • Solid ceramic plungers • Exclusive high pressure seal design • Rated from 140° to 160° F. depending on the model. Seal options up to 180° F. available • Wet ends can be serviced without entering the crankcase • Pumps are rated to 50 micron particles and 5-9 ph.

Note: Mounting rails and mounting kits are not included and must be ordered separately.