Search
Call for Live Order Assistance & Technical Support (7:30am-5pm CST)
All Categories
    Menu Close

    Roller Pump, 6-Rollers, Cast Iron, 3/4" Ports, Less PTO Coupler, CCW Rotation

    An extremely versatile pump despite low cost. Available in Ni-Resist, Cast Iron and Silver Cast® construction. Equipped with Viton® seals, sealed bearings. Maximum Temperature is 140 Deg. F. Metallic rotor. Weight is 9 lbs.

    Max RPM: 1200
    Shaft: 5/8" O.D.
    Seals: Viton
    Pump Shaft Rotation: CW or CCW when facing shaft
    Capacity: to 21 GPM
    Max Pressure: 150PSI
    Super Rollers
    Use 1" Suction Line at speeds above 800 RPM.

    These roller pumps are used mainly in agriculture, park and turf management and pest control. They operate efficiently at tractor PTO speeds, will handle suspensions of non-abrasive wettable powders and will tolerate considerable wear before performance is adversely affected.

    Body: Cast iron, Ni-Resist or Silver Cast®.
    Seals: Viton® is standard on 1700, 4000, 6500 and 7560 Series. Buna-N is standard on the 1500 series.
    Shafts: are all of Stainless Steel.
    Rollers: These pumps are all supplied with a complete roller of Nylon & Polypropylene. Teflon and Buna-N rollers are available for specific applications.

    XL Silver Cast® Pumps from HYPRO
    Silver Cast is a new alloy developed by Hypro which is harder, wears better and is more corrosion resistant than any other casting material used in Ag Roller Pumps. These pumps will outlast cast iron models by 10 times. Use on Round-Up™ type products.

    Viton® is a registered trademark of DuPont Performance Elastomers
    Manufacturer: Hypro - Pentair
    Save!
    • 5% on 4
    $212.00 / EA
    i h
    Ship to

    DELAY MY SHIPMENT until all in-stock items AND backordered items are available in one warehouse before shipping. (You will receive only one freight bill if you choose this option).

    *

    Ship my in-stock items now, ship my backordered items when they become available. (You will be billed for each shipment).

    *
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Products specifications
    Pump Type Roller
    Body Material Cast Iron
    Seal Material Viton®
    Inlet Size 3/4"
    Outlet Size 3/4"
    Shaft Size 5/8"
    Max GPM 21
    Max PSI 150
    Motor Max RPM 1200
    Warning

    WARNING: [Cancer and Reproductive Harm] www.P65Warnings.ca.gov

    Manufacturer Part Number 6500C
    Customers who bought this item also bought
    Picture of Raise Diaphragm for Nylon Valves, Viton®

    Raise Diaphragm for Nylon Valves, Viton®

    TeeJet / Spraying Systems
    SS21953VI
    Diaphragm, Raised Style, Viton, Repair Parts
    Save 10% on 100!
    $1.80 / EA
    Picture of flexDUCT 620 Ducting/Blower Hose, General Purpose, 6" ID, 6.36" O.D.

    flexDUCT 620 Ducting/Blower Hose, General Purpose, 6" ID, 6.36" O.D.

    Kanaflex Hose
    KA620WD-6
    Hose, Ducting / Blower, General Purpose, 6IN, EPDM, Sold Per Ft, Standard Pkg is 50 Ft
    Save 20% on 50!
    $11.60 / FT
    Picture of ConeJet Hollow Cone Spray Tip Nozzle, 4 Orifice, Green, Ceramic Insert

    ConeJet Hollow Cone Spray Tip Nozzle, 4 Orifice, Green, Ceramic Insert

    TeeJet / Spraying Systems
    SSTXVK4
    Nozzle, Teejet Conejet Ceramic, Green
    $5.51 / EA
    Picture of AI Air Induction Flat Spray Tip Nozzle Only, Polymer, 80?, .03 Orifice, Blue Stainless Insert, Dicamba Approved

    AI Air Induction Flat Spray Tip Nozzle Only, Polymer, 80?, .03 Orifice, Blue Stainless Insert, Dicamba Approved

    TeeJet / Spraying Systems
    SSAI8003VS
    Nozzle, Teejet Air Induction, Blue
    $12.32 / EA
    Picture of Blank QuickJet Cap, Black, with EPDM Gasket

    Blank QuickJet Cap, Black, with EPDM Gasket

    TeeJet / Spraying Systems
    SSQJ19843CELR
    Blank Cap With Gasket
    $2.25 / EA