Rotary Vane Pump, Low Flow, Brass, 5.3 Max GPM, V-Band, with Relief Valve, No Strainer

These pumps are available for V-Band clamp mounting to 48Y frame motors. This series of pumps are also standard with built-in relief valves preset a 170 psi. Viton® seals are standard. Nominal speed on all units is 1725 rpm

Model PO1001: Brass Pump Body. Rated to 5.3 GPM and 200 PSI. Standard in "CO" style with V-band clamps. 1/2" FPT ports.
Viton® is a registered trademark of DuPont Performance Elastomers

Manufacturer:

SKU: PBPO1001

VIEW CATALOG PAGE E0042

$162.00 / EA

Qty:

i h

Additional Information

Positive Displacement Rotary Vane Pumps: An excellent choice for handling clean fluids such as tire cleaners, presoak chemicals, spot-free RO water, foam brush solutions, oils, syrups, inks, dyes, acids, etc. Unique design handles liquids with low lubricating characteristics at relatively high pressures. Pumps should be protected from matter larger than 125 microns.

Pump Characteristics:

Viton® sealing parts for added chemical resistance (1300/1500/1600 & PO300 series)
Replaceable brass or stainless housings
Self-priming
Three-bearing design for pulley or direct drive
Carbon graphite internal vanes, bearings and liner provide no metal to metal contact for long life and quiet operation
Available with relief valves to protect against over pressure (1300/1500/1600 & PO300 series)
Mounting flanges for direct mounting to C-face motors or V-band mounting for "carbonator" motors with "y" frames
Maximum temperature is 150 Deg. F. (190 Deg. with special seals). Maximum viscosity is 500SSU.

Customers who bought this item also bought

Visi-Flo Flow Meter With Metering Valve, Stainless, 6 to 60 GPH Calibration

DRVFBSSV81

Flow Meter, Visi-Flow With Valve, 1/8IN Fpt, SS, 6-60 Gph

$187.00 / EA

High Flow, Low PSI RO Membrane, 4" x 40", 2800 GPD @ 100 PSI

EPCW4040SF

Reverse Osmosis Membrane, 4IN x 40IN, 2800 Gpd at 100 Psi with 77F Tap or Brackish Water

$215.50 / EA

Pressure Gauge, Liquid Filled, Center Back Mount, 200 Max. PSI, 2-1/2" Face, Stainless Case, 1/4" Stem

AH2640-70

Pressure Gauge, Back Mount, Liquid Filled, 200 Psi, 2.5IN

$12.10 / EA

Pressure Gauge, Liquid Filled, Center Back Mount, 600 Max. PSI, 2-1/2" Face, Stainless Case, 1/4" Stem

AH2640-80

Pressure Gauge, Back Mount, Liquid Filled, 600 Psi, 2.5IN

$12.30 / EA

Pressure Gauge, Bottom Mount, Liquid Filled, 2000 Max. PSI, 2-1/2", Stainless Case, Import

AH2750-3

Pressure Gauge, Bottom Mount, Liquid Filled, 2000 Psi, 2-1/2IN, Stainless Case, 1/4IN Brass Stem

$12.70 / EA