Rotary Vane Pump, Medium Flow, Stainless Steel, 4.0 Max GPM, C-Face, No Relief Valve, No Strainer

These Pumps are designed for use with C-Face motors and do not include built-in relief valves. Primarily used with RO water in spot-free systems. These pumps feature Buna seals (EP & Viton® optional). Maximum viscosity is 500SSU. Maximum 1725 rpm.

Series 2600 pumps feature stainless steel pump bodies and internals. Flows to 4.40 GPM. Maximum pressure is 200 PSI. 1/2" FPT Ports. Shaft size is 7/16".
Other models with different flow rates are available on special order.
See coupling section for appropriate drive couplers for above pumps.

Viton® is a registered trademark of DuPont Performance Elastomers

Manufacturer:

SKU: PB2607A

VIEW CATALOG PAGE E0042

$198.00 / EA

Qty:

i h

Additional Information

Positive Displacement Rotary Vane Pumps: An excellent choice for handling clean fluids such as tire cleaners, presoak chemicals, spot-free RO water, foam brush solutions, oils, syrups, inks, dyes, acids, etc. Unique design handles liquids with low lubricating characteristics at relatively high pressures. Pumps should be protected from matter larger than 125 microns.

Pump Characteristics:

Viton® sealing parts for added chemical resistance (1300/1500/1600 & PO300 series)
Replaceable brass or stainless housings
Self-priming
Three-bearing design for pulley or direct drive
Carbon graphite internal vanes, bearings and liner provide no metal to metal contact for long life and quiet operation
Available with relief valves to protect against over pressure (1300/1500/1600 & PO300 series)
Mounting flanges for direct mounting to C-face motors or V-band mounting for "carbonator" motors with "y" frames
Maximum temperature is 150 Deg. F. (190 Deg. with special seals). Maximum viscosity is 500SSU.