Complete Above Ground Design
47 GPM, 1000 PSI, 20 HP - 3 Phase / 480V Model for Pickups, Vans, and Cars.
Model SBU491000-OTC480 is a high-volume system that boasts two separate pumping systems for a total of 49 GPM at 1000 PSI. The larger 20HP pump/motor unit is photo eye activated and supplies the wheel blasters, side blasters, and top rinse pans with 27GPM. The smaller 15HP pump/motor unit is photo-eye activated and supplies the undercarriage unit with 20 GPM. This system includes ramp outriggers, mounting poles, and extension poles that secure to the ramp frame. Allows for cleaning up to approximately 6.5” high. Additional extension poles can be ordered if needed. 480V power required
The unit is photo-eye activated and is designed for permanent locations where vehicles will drive through the cleaning process. Pumps are automatically activated when vehicles "break" the photo eye beam and then shut down when the vehicle has left the cleaning ramp. Systems' electrical panels are designed to be manually activated if photo eyes are unnecessary or required. All systems include belt drive pump/motor unit, NEMA 4X electrical panel, stainless steel spray ramp, stabilizer nozzles, rotating swivel arms, photo eyes, stands, and connector fittings.
Note: High-pressure supply lines from pump station to rinse ramp and/or wheel blasters are not included as these will vary with each location. 1/2" or 3/4" high-pressure feed lines can be supplied if needed